Name Plate Engraving

Posted by Panel Tags Direct on

There are common ways of having an electrical accident due to lack of proper name plate engraving labels on electrical pieces of equipment which can include the following:

  • Using defective tools
  • Using tools or equipment in close proximity to energized parts · Working in a high location near electrical lines
  • Overloading electrical outlets with too many appliances
  • Not researching the locations of electrical sources when making a repair
  • Not properly draining energy from a capacitor
  • Removing a 3-prong from a plug-in and cutting off a prong to make it fit inside a 2-prong outlet

There are several causes that can make the equipment unsafe and these can include, frayed electrical cords, using homemade extension cords, improper grounding, faulty insulation, bare conductors, defective parts, or unguarded live parts.

It is important for a person to use special caution when working in a potentially harmful or dangerous environment. If there is an accidental discharge of static, it can cause a fire or explosion to take place.

If there are flammable liquids, combustible dust, corrosive materials, or if a person is a poor housekeeping, it can all increase the chances of an electrical injury which can be fatal, which is why it is important to store liquids in the proper place and in the original containers.

It is important to know about how to observe safety around electricity because it can possibly help you avoid an injury or being killed due to a hazardous accident.

 Basic electrical safety is something every person should be aware of because it can help prevent someone from having a serious or possibly fatal accident.

Electricity will not flow through a substance unless it has a concrete path that allows it to return to its source but current can go through a person and another conductor such as metal, earth, and concrete, which is why it is important to exercise caution.

When working with electricity, materials should have an insulating coating and a person should always wear gloves to avoid becoming a conduit through which electricity can flow.

When a person gets electrocuted, it can result in serious harm which can include burns, muscle damage, respiratory distress, and cardiac damage.

Part of responsible behavior around electricity includes knowing how to prevent being harmed or killed due to electrocution or an electrical fire, so always be aware of basic safety rules and do what you can to prevent injury or death from electricity.

There are things a person can do to protect themselves and others in the workplace and home and thus eliminate the chances for injury or worse.

Always plan your work and have a safety plan in place, avoid working in wet or hazardous conditions, and always use ground fault interrupters. Avoid overhead power lines, use proper wiring and connections, only use extension cords temporarily.

Only use tools that are safe and avoid wearing any items that will serve as being a conductor for electricity and use only Class E hard hats and ANSI-approved footwear with the code EH.


Leave a comment

Please note, comments must be approved before they are published